Artificial Marble Tiles
Products Artificial Marble Tiles High Quality
Plain White
The pure white brings infinite imagination to people, simple but fine, plain but free!
Warm Yellow
Tender and romantic love, sweet life, imperial dignity and noble temperament seeps in all kinds of tender feelings
plate of 600mm *600mm, a natural stone plate needs 15mm thick or more, and synthetic stone needs only that 12 mm is enough. While raising strength, it can still reduce the load of building and the cost of construction.
4．Low rate of water imbibitions: The natural stone materials have plenty of tiny hole and subtle slight flaw, and must have certain inhaling water rate. Natural stone material can arouse the change of color after inhaling water, especially granite, can produce the phenomenon with different depth after inhaling water. The adhesive of man-made stone is resin, resin don’t inhale any water, therefore the man-made stone inhaling water rate far less than the natural stone. Man-made stone inhale water rate generally less than 0.36%, and the synthetic stone made of little pellet inhale water rate is just only 0.01 ～ 0.02%
5．In favor of environmental protection: The resin in Art-Stone H-Stone brand synthetic stone does not have poison, radiation is far lower than Class A level standard, its surface density is very high, and does not inhale water, so Art-Stone H-Stone brand have strong ability to fight pollution, it is a kind of very good environmental protection building materials.
6．Good ability of preventing slipping: The resin in Art-Stone H-Stone brand synthetic stone is a kind of material with great coefficient of friction, the coefficient of friction of synthetic stone is larger than the natural stone materials. The product coefficient of friction of its quartz series and granite series is larger than 0.45, marble series is higher, the highest is up to 0.9, so synthetic stone need not to do anything for preventing from slipping.
·Product performance index:
·Density：2.25-2.30g/cm3(GB/T 1033-1996)
·Water Imbibition：<0.10%(GB/T1034-1986
·Bend level：31.2Mpa（JC 908-2002 standards）
·Slam index：4.01kJ/m2(JC 908-2002 standards)
·Compressibility：65.9-150Mpa（GB/T 2569-1995standards）
·Hardness：3-4Mohs（EN 101 BS 6431 part.13 standards）
·Wear-resisting index：0.021g（GB/T 1768-1979(1989) standards）1000g/500r
·Hot expansion index：3.38*10-5℃-1（GB/T 1036-1989 standards）
·Specific resistance：1*10E15ohm（ASTM D 4535 EN 103 standards）
·Coefficient of friction：0.71-0.49 honed 400 0.78-0.47polished（ASTM C1028Neolite:Dry/Wet） standards）
·Accelerate ageing level：NO VISIBLE CHANGE （ASTM D 2565）
·Surface fire-resistance：Class A or Class 1 （ASTM E 84 BS 476 part.7 standards）
Art-Stone H-Stone brand’s Quality Management System
We co-operate with top stone materials institutes in China and adopt advanced equipment and technology from Italy-vacuum vibration pressurizing. Art-Stone H-Stone brand contains 90% natural marble. It’s superior to natural marble in characteristics like density, Compressibility and waterproof. Automatically cut by high-precision cutter, it needs no repairing at worksite thus reduces error and saves work hour. We use several steps in producing the synthetic stone. The first step is selecting and sorting original stone based on the pattern, color and size. Secondly, according to different formula, use stone crusher to crush the original stone into granules of various size. The third step is adding cohesive to the granular stone, stir them in vacuum, vibrate and add pressure, then come out the standard stone plates. After polishing the sides and angle again, we got the final products of standard size. The final work is packing. Art-Stone H-Stone brand continually improves quality to meet the customers’ requests and fulfill the market demand. We guarantee top product quality by carefully inspecting and analyzing the products quality, specifying management responsibilities in detail meanwhile efficiently managing the resources in the concerned value-added activities.